@article {447,
	title = {Adaptive fuzzy PID control for servo motor direct-drive pump control system},
	journal = {Journal of Digital Information Management},
	volume = {12},
	year = {2014},
	note = {Cited By (since 1996):1Export Date: 10 July 2014},
	month = {2014},
	pages = {1 - 7},
	abstract = {The direct-drive pump control system has been gradually applied to the industrial control field due to its high control precision, fast response, small throttle loss and compact structure. This paper adopts the fuzzy PID control method to resolve the hydraulic cylinder position servo control of direct-drive pump control system. The system model and fuzzy PID control algorithm was established by using AMEsim/Simulink joint simulation platform. The step response and Sine tracking performance of the system with PID and fuzzy PID control algorithms was investigated by simulation. At the same time, the performance of PID and fuzzy PID control was studied on the self-developed electro-hydraulic servo control experiment table. The results show that the adaptive fuzzy PID control can greatly improve the performance of the PID control, and has the characteristics of fast response, short rise time, small time delay and overshoot.},
	keywords = {Adaptive fuzzy PID control, AMESim/simulink, Direct-drive pump control system, Labview, Position servo control},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84900429525\&partnerID=40\&md5=987ea43b8cb58e566d21061a4b7a3558},
	author = {Zheng, J.-M. and He, M.-J. and Liu, E.-D. and Yuan, Q.-L. and Xiao, J.-M. and Tang, A.-F.}
}
@article {381,
	title = {A hybrid method to deformation force of high-speed cold roll-beating forming},
	journal = {Journal of Digital Information Management},
	volume = {11},
	year = {2013},
	note = {Cited By (since 1996):1Export Date: 10 July 2014},
	month = {2013},
	pages = {146 - 153},
	abstract = {High-speed cold roll-beating forming technique is a new near-net plastic forming method that the intermittent high-speed roll-beating is used to achieve dynamic impact local loading, and that is fast, transient, high impact, large deformation of the complex forming process. For this forming process, the main stress method is employed to derive an analytic formula for the deformation force. Taking into account the main stress method can not reflect impact factors such as high-speed transient roll beating in process of this analytic solution, then the ABAQUS/Explicit is applied to simulate for highspeed cold roll- beating. The regression analysis is used to correct for the analytic formula based on simulation results, which makes the analytic formula more accurate reflection of deformation force of the different technological parameters of high-speed cold roll-beating. The forming experiments are carried out with self developed high-speed cold roll-beating experimental equipment and the experimental of deformation force is measured to verify the correctness of the corrected analytic formula.},
	keywords = {Cold roll-beating, Deformation force, Experimental verification, Slab method},
	url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84879119848\&partnerID=40\&md5=beed77f3dd930748bf1900ffca1e5ad0},
	author = {Yang, M.-S. and Li, Y. and Yuan, Q.-L.}
}
